Click here to return to the HomePage. Click here for Sales information. Click here for Service. Click here to see our Products. Click here to see our Featured Products. Click here to order Supplies. Click here for a brief Company Profile. Click here to Contact Us.

Marquette Treadmills T 2000

Series 2000
Treadmill

The extra-long, 60-inch treadmill surface provides an extra margin of safety for patients. The Series 2000 may be slowed gradually to a stop or stopped immediately with an emergency stop button. The emergency stop button is standard on the Series 2000 treadmill. Full front and side rails are also standard.

It accelerates slowly from a standstill to accommodate severely debilitated patients. Digital microprocessor control assures settings that never need to be calibrated. its extremely smooth and quiet operation facilitates accurate blood pressure measurements even at high work loads. The Series 2000 treadmill has fewer moving parts than other treadmills. Its 450 pound weight capacity and 0 to 13.5 miles per hour speed range sets the Series 2000 treadmill apart from other treadmills.

Feature Highlights
Patient Safety
  • 60-inch walking surface
  • Two stopping modes
  • Standard full handrail set
  • Standard emergency stop switch
  • Starts from 0 mph

Versatility

  • 0 to 13.5 mph speed range
  • Weight capacity of 450 lbs
  • 0 to 25 percent grade range

 

Reliability

  • 3.0 horsepower motor
  • Self-calibrating for speed and grade
  • Digital control insures precise speed and grade control



The Series 2000 treadmill also comes with an optional pediatric handrail.

Performance Specifications

Maximum rated load: 204 kg (450 lb) 
Belt speed range: 0 to 13.5 mph at 60 Hz
     continuously variable; zero mph startup 
Driver motor: 3.0 hp 
Elevation motor: 1/10th hp 
Elevation range: 0.0 to 25.0% grade,
     continuously variable 
Maximum leakage current: 100 ua, chassis to
     ground

INTERFACE 

  • CASE 16 exercise testing system
  •  CardioSys exercise testing system
  •  CASE 15 exercise testing system ID
  •  CASE 12 exercise testing system
  •  MAX- I exercise testing system 1.3
  •  MAX Personal exercise testing system
  •  MAC VU system with exercise testing option 
  • CENTRA multifunction cardiology workstation with exercise testing option

Environmental Specifications
Power requirements: 208 to 240 VAC, 50/60 Hz, single-phase, 20 amperes, NEMA 6-20 R wall socket (dedicated circuit recommended)

OPERATING CONDITIONS
Ambient temperature: I 0'C to 35'C
(50'F to 95'F)
Relative humidity: 20% to 90%

STORAGE CONDITIONS
Temperature range: -1 8'C to 49'C 
(0'F to 120'F)
Relative humidity: 20% to 90%

Physical Specifications

Weight: 181.4 kg (400 lb) 
Walking area: 45.7 cm x 152.4 cm 
                     (18 in x 60 in) 
Floor space required: 73.7 cm x 195.6 cm
                     (29 in x 77 in) 
Walking surface height: 14.0 cm (5.5 in)
Handrail height above walking surface 
           Front: 101.6 cm (40 in) 
           Side: Maximum 88.9 cm (35 in)
           descending at a 50 angle to 81.3 cm
           (32 in)

Due to continual product innovation, Marquette designs and specifications are subject to change without notice.

 

Manual Treadmill Controller MTC1
BUILT IN PROTOCOLS


Rehab/Stress: 10 rehabilitation/5
    stress
Exercise/Fitness: 10 exercise/5
     training plus manual speed and
     grade
*Mounts on center handrail of the treadmill


Back to HomePage